How to Program a DIRECTV Remote to a Soundbar

How to Program a DIRECTV Remote to a Soundbar: A Step-by-Step Guide

If you want to use your soundbar with DIRECTV, you’ll need to program your remote. The process is fairly simple and straightforward, so even if you’re not used to using a remote control device, you should be able to get it done in just a few minutes.

In this blog post, we will discuss a straightforward and efficient way to program your DIRECTV remote to control your soundbar. By following these simple steps, you can easily configure your DIRECTV remote to work with your soundbar, making your home entertainment experience more seamless and user-friendly. Plus, we’ll answer some frequently asked questions at the end to clear any doubts you might have.

Introduction

DIRECTV remotes are designed to provide a convenient single interface to control multiple devices, ensuring a hassle-free entertainment experience. Programming your DIRECTV remote to work with a soundbar eliminates the need for multiple remotes, giving you a cleaner and more streamlined setup. This step-by-step guide will walk you through programming your DIRECTV remote to control your soundbar.

Before You Begin: Identify Your DIRECTV Remote Model

DIRECTV offers two primary remote models: the Standard Universal Remote and the Genie Remote. Since the programming process might differ slightly between them, it is essential to know which type you have. You can typically find your remote model on the upper left corner of the remote.

Programming a Standard Universal DIRECTV Remote to a Soundbar

Step 1: Locate the Soundbar Code

Before programming your remote, find the manufacturer’s code for your soundbar. You can typically find the code in your soundbar’s user manual, online on the manufacturer’s website, or by contacting the manufacturer’s customer support.

Step 2: Turn on the Soundbar

Make sure your soundbar is powered on and ready to be programmed. Keep it close to your DIRECTV remote throughout the process.

Step 3: Entering the Soundbar Code

  1. Press and hold the “Mute” and “Select” buttons on your DIRECTV remote simultaneously until the green light on the top of the remote flashes twice.
  2. Using your DIRECTV remote’s keypad, enter the five-digit manufacturer’s code for your soundbar. If the code was entered correctly, the green light will flash twice again.
  3. Now, point your DIRECTV remote at the soundbar and press the “Volume Up” button. If the volume increases, your remote has been successfully programmed.

Programming a Genie Remote to a Soundbar

Step 1: Locate the Soundbar Code

Just like with the Standard Universal Remote, find the manufacturer’s code for your soundbar to program a Genie Remote.

Step 2: Turn on the Soundbar

Ensure your soundbar is powered on and ready to be programmed.

Step 3: Entering the Soundbar Code

  1. Press and hold the “Mute” and “Enter” buttons on your Genie remote until the screen displays “Applying IR/RF Setup.”
  2. When the setup is complete, release both buttons.
  3. Enter your soundbar’s five-digit manufacturer’s code using the DIRECTV remote keypad. The green light will flash twice if the code was entered correctly.
  4. Point your remote at the soundbar and press the “Volume Up” button. When the volume increases, your remote has been successfully programmed.

FAQs:

Can a DIRECTV remote control all soundbar brands and models?

While most soundbars are compatible with DIRECTV remotes, your remote might not work with some older or unsupported models. Always refer to your soundbar’s user manual or contact the manufacturer to ensure compatibility.

What if I lost my soundbar manufacturer’s code?

If you can’t find the code in your soundbar’s user manual, look it up online on the manufacturer’s website or contact the manufacturer’s customer support for assistance.

Can I program a DIRECTV remote to control other devices besides a soundbar?

Yes, DIRECTV remote controls can be programmed to control various devices like TVs, Blu-ray players, and audio systems. Consult your remote’s user manual for specific instructions on programming other devices.

 I followed the steps but couldn’t program my remote. What should I do?

If you still can’t program your remote, try the process again, ensuring you follow each step carefully. If problems persist, consult your DIRECTV remote or soundbar user manual for troubleshooting advice or contact DIRECTV customer support for assistance.

Conclusion

Programming a DIRECTV remote to work with your soundbar has never been more accessible. By following this step-by-step guide, you can enjoy a more seamless switching between devices and an improved home entertainment experience. If you have any further questions or need assistance, refer to the following frequently asked questions or consult your soundbar user manual or DIRECTV customer support.

Explore My Tested and Reviewed Soundbar Guides

SAMSUNG SOUNDBAR REVIEWS

BEST SOUNDBARS

SAMSUNG SOUNDBARS FOR TV

BEST SOUNDBARS UNDER 500$ – 1000$

SAMSUNG SOUNDBAR REVIEWS

SOUNDBAR INFORMATION

How useful was this post?

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *